FITTING:
Changing the fog/spotlamp bulbs only takes a minute, but its more fiddly than I expected so heres the process.
1. Remove the 3 bolts holding the spotlamp in place using a 10mm wrench.
2. Unclip the plug on the spotlamp wire and slide it free of the wiring-harness in the bumper.
3. Turn the grey seal-plug anti-clockwise until it can be lifted out of the seal. Be careful not to pull too hard on the wiring.
4. Slide the earth-wire, with the light-blue rubber-sheath, up off its mount on the spotlamp chassis.
5. Slide the end of the live wire, coming off the base of the bulb, out of its socket in the seal-plug. The socket sits in a mount and can be lifted out to make it easier.
6. Push down the metal-wire clip behind the bulb at the side nearest the gray-plastic adjustment-bracket and move the wire-clip out of its mount and rotate it out of the way.
7. Replace the bulb with the new one and reverse the process.
No comments:
Post a Comment